Biedermann RollLam 120CS
- Front media holder for RollLam, The front media holder made of canvas lightens the handling of the print media.
- Unroll axes, In case of working with several different films or rather films in different width a frequent change-over can be avoided by additional unroll axes.
- Take up unit - backside. The take up unit with slipping clutch is mounted on the backside of the machine and allows working from “roll to roll”.
- Take up unit - front side. The take up unit with slipping clutch is mounted on the front side of the machine and allows laminating on both sides.
|Working Width/Roller Width:||120/130 cm|
|Dimensions:||170 x 68 x 125 cm|
|Height of Front Work Table:||92 cm|
|Weight:||Approx. 168 kg|
|Max. Board Thickness:||25 mm|
|Diameter of Rollers:||Approx. 112 mm|
|Speed:||Approx. 0-4 m/min|
|Voltage:||230 V/0,07 kW|
|Adjustment of Height:||Central|
|Top Unroll Axis with Autogrip:||Yes|
|Upwind Axis for Silicone Release Liner:||Yes|
|Unroll Axis with Quick Gripping Cones:||Yes|
|Forward and Reverse Action:||Yes|