• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-125 epoksiliima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-125 epoksiliima
Tuotekoodi
7000021288
Valm. tuotekoodi
L125H
Toimituskulut alk.
238,68 €
ALV 0,00 %
kpl

Harmaa
50 ml
12/pakkaus

We formulated 3M™ Scotch-Weld™ Epoxy Adhesive 125 as a low odor, two-part epoxy that creates strong structural and flexible bonds on metal, ceramics, wood and many plastics. It provides the reliability and strength you need to maintain productive, cost effective results.

- Flexible for higher peel strength and better vibration resistance
- Maintains a strong bond under expansion, contraction, and limited movement
- Medium viscosity helps minimize running, dripping, or migration
- Flows smoothly for controlled dispensing where needed
- Effective adhesive system for bonding, joining, gluing, attaching, assembling, encapsulating, potting, and sealing applications

3M™ Scotch-Weld™ Epoxy Adhesive 125 is a versatile, medium viscosity, epoxy adhesive that pours easily with minimal dripping, running and migration that will flow smoothly for a controlled, accurate dispensing. Its flexibility makes it ideal for applications involving dissimilar surfaces, where coefficients of thermal expansion are a consideration, for example when bonding glass to metals.

Compared to common 5 minute epoxies, this flexible, longer work life product provides better plastic and glass bonding, lower odor and flexibility for higher peel and impact resistance. The mix ratio is 1:1 and provides a 25 minute work life to allow plenty of time for positioning and to adjust for fit prior to setting. The adhesive reaches handling strength in approximately 2.5 hours and is fully cured in 7 days (at 72°F/22°C). This adhesive is available in a variety of package sizes to suit the needs of the user and the job.

Adhesion Strength‎ - 990 oz/in
Adhesive Type‎ - Epoxy
Applications‎ - Hard Disk Drive Component Assembly,‎ Bonding,‎ Potting
Brand‎ - Scotch-Weld
Color‎ - Gray
Consumer Label‎ - No
Flame Retardant‎ ‎ - UL94 HB
Full Cure‎ - 7 Days @ 72 F (22 C)
Hardness‎ - 70 Shore D
Industries‎ - Transportation,‎ Specialty Vehicle,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
Mix Ratio Volume Base:Accelerator‎ ‎ 1 : 1
Open Time - ‎ 25 minutes @ 72 F (22 C)
Physical Form‎ - Flowable Liquid
Product Form‎ - Each
Product Type‎ - Epoxy Adhesive
Set Time‎ - 2.5 Hour
Shear Strength at 72 Degrees F (22 Degrees C)‎ - 4300 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)‎ ‎ - 15
Specific Gravity‎ - 1.15
Storage Temperature‎ ‎ - 72 Degree Fahrenheit
Substrate 1‎ - ABS,‎ Nylon,‎ Fabric,‎ Fiberglass Reinforced Plastic,‎ Painted Surface, Easy-to-Bond (HSE),‎ Felt,‎ Cork & Fibrous Glass,‎ PVC,‎ Plastic, Easy-to-Bond (HSE),‎ Rubber (Except EPDM),‎ EPDM Rubber,‎ High Pressure Laminate,‎ Bare Metal,‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Acrylic,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Plastics (Flexible Vinyl),‎ Polyester
Substrate 2‎ - ABS,‎ Nylon,‎ Fabric,‎ Fiberglass Reinforced Plastic,‎ Painted Surface, Easy-to-Bond (HSE),‎ Felt,‎ Cork & Fibrous Glass,‎ PVC,‎ Plastic, Easy-to-Bond (HSE),‎ Rubber (Except EPDM),‎ EPDM Rubber,‎ High Pressure Laminate,‎ Bare Metal,‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Acrylic,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Plastics (Flexible Vinyl),‎ Polyester
Substrates‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Viscosity Range (cps) at Room Temperature‎ ‎ - 52,500

tech
tech

AAA-luokitus

3M

Roland

Epson

Epilog

Epilog

Powered by Clover Shop® - www.clovershop.com