• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-807 akryyliliima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-807 akryyliliima
Tuotekoodi
7000028571
Valm. tuotekoodi
L807
Toimituskulut alk.
169,32 €
ALV 0,00 %
kpl

Vaalea
47 ml
12/pakkaus

3M™ Scotch-Weld™ Acrylic Adhesive 807 is able to perform on the most difficult surfaces, even with minimal surface preparation. It offers good shear and peel strength and that makes it ideal for industrial applications where permanent, high-strength bonding of similar and dissimilar surfaces is a requirement. It will effectively bond wood, ceramic, plastic and most metals. Our 3M™ Scotch-Weld™ Acrylic Adhesive 807 offers a non-sag, moderate viscosity formula that won't slump or sag excessively when applied, allowing for precise application while ensuring your adhesive remains directly where you apply it, even on vertical surfaces.

Recommended Applications:

- Joining
- Bonding
- Gluing
- Assembling
- Sealing

Two Parts, One Common Bond
The mix ratio is 1:1 for quick, precise dispensing, and with a three- to five-minute working time there's some opportunity for repositioning. The adhesive reaches handling strength in approximately 20-minutes and is fully cured in 24 hours (at 72°F/22°C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although generally slightly lower than epoxy adhesives. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Adhesion Strength‎ ‎ 320 oz/in
Adhesive Type‎ ‎ Acrylic
Brand‎ ‎ Scotch-Weld
Color‎ ‎ Off-White
Consumer Label‎ ‎ No
Full Cure‎ ‎ 24 Hours @ 72 F (22 C)
Hardness‎ ‎ 70 Shore D
Industries‎ ‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Signage,‎ General Industrial,‎ Electronics,‎ Consumer Goods
Mix Ratio Volume Base:Accelerator‎ ‎ 1 : 1
Open Time‎ ‎ 5 minutes @ 72 F (22 C)
Physical Form‎ ‎ Flowable Liquid
Product Form‎ ‎ Gallon,‎ Each
Product Type‎ ‎ Acrylic Adhesive
Set Time‎ ‎ 10 Minute
Shear Strength at 72 Degrees F (22 Degrees C)‎ ‎ 4300 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)‎ ‎ 12
Specific Gravity‎ ‎ 0.97,‎ 8.2 Pound Per Gallon (US)
Storage Temperature‎ ‎ 72 Degree Fahrenheit
Substrate 1‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Substrate 2‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Substrates‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Viscosity Range (cps) at Room Temperature‎ ‎ 75000,‎ 50,000,‎ 35000

tech
tech

AAA-luokitus

3M

Roland

Epson

Epilog

Epilog

Powered by Clover Shop® - www.clovershop.com