Addnorth E-PLA - 1.75mm - 750g
add:layer E-PLA (short for Easy PLA) is made out of the bio-degradeable bio-plastics PLA and it is our most easy-to-use material, with the widest selection of colors. If you are mainly printing visual models in many colors, this is the material for you.
The low process temperature in our production makes the filament low in friction as well as it preserves the fine characteristics of the polymer.
A value-for-money filament without compromising on quality! If nothing else is explicitly stated, all colors are non-transparent.
Diameter tolerance ± 0.025 mm
Heated build platform No (or up to 60 °C)
Print temperature 195-225 °C
Spool size 200 x 55 mm (750 g)
Spool hub diameter 52 mm
Weight empty spool 215 g
Weight filament 750 g
|Tensile Strenght, Break||ISO 527||MPa||58|
|Tensile Modulus||ISO 527||MPa||2870|
|Tensile Elongation, Break||ISO 527||%||8|
|Flexural Strenght||ISO 178||MPa||120|
|Flexural Modulus||ISO 178||MPa||3155|
|Glass Transition Temperature (Tg)||DSC||°C||55-60|
|Deflection Temperature at 0.45||ISO 75||°C||55|