Roland TrueVIS2 SG3-540

SG3-540

SG3-300

Printing method

Piezo ink-jet method

Media

Width

295 to 1,371 mm (11.7 to 54 in.)

182 to  762 mm (7.2 to 30 in.)

Thickness

Max. 1.0 mm (39.3 mil) with liner, for printing

Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting

Roll outer diameter

Max. 250 mm (9.8 in.)

Roll weight

Max. 35 kg (77 lb.)

Max. 30 kg (66 lb.)

Core diameter

76.2 mm (3 in.) or 50.8 mm (2 in.)

Printing/cutting width (*1)

Max. 1,346 mm (52.9 in.)

Max. 736 mm (28.9 in.)

Ink

Type

TrueVIS INK 500 ml pouch

Colors

Four colors (cyan, magenta, yellow, and black)

Printing resolution (dots per inch)

Max. 1,200 dpi

Cutting speed

10 to 300 mm/s (0.39 to 11.8 in/s)

Blade force (*2)

30 to 500 gf

Blade

Type

Roland CAMM-1 series blade

Offset

0.000 to 1.500 mm (0.0 to 59 mil)

Software resolution (when cutting)

0.025 mm/step (0.98 mil/step)

Media heating system (*3)

Print heater set temperature: 30 to 45 °C (86 to 113 °F)

Dryer set temperature: 30 to 55 °C (86 to 131 °F)

Connectivity

Ethernet (100BASE-TX/1000BASE-T, automatic switching)

Power-saving function

Automatic sleep feature

Power requirement

100-120/220-240 Va.c.

100-120/220-240 Va.c.

 50/60 Hz 8.0/4.1 A

50/60 Hz 5.4/2.7 A

Power consumption

During operation

Approx. 1,090 W

Approx. 710W

Sleep mode

Approx. 50 W

Acoustic noise level

During operation

63 dB (A) or less

During standby

53 dB (A) or less

Dimensions  (Width x Depth x Height)

2,632 mm × 748 mm × 1,320 mm (103.7 in. x 29.5 in. x 52.0 in.)

2,022 mm × 748 mm × 1,320 mm (79.7 in. x 29.5 in. x 52.0 in.)

Weight

183 kg (404 lb.)

150 kg (331 lb.)

Environment

During operation

Temperature: 20 to 32 °C (68 to 89.6 °F), humidity: 35 to 80 % RH (no condensation)

Not operating

Temperature: 5 to 40 °C (41 to 104 °F), Humidity: 20 to 80 % RH (no condensation)

Included items

Dedicated stands, power cord, Media take-up unit, media holders, replacement blade for separating knife, cleaning liquid, drain bottle, User's Manual, Software(VersaWorks, Roland DG Connect), etc.

*1

The length of printing or cutting is subject to the limitations of the program.

*2

• 500 gf is the maximum instantaneous blade force.

• The blade force must be adjusted according to details such as the media thickness.

*3

• Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.

• Depending on the ambient temperature and media width, the preset temperature may fail to be reached.