Etusivu > LAITTEET > FabLab- laitteet
Stika-sarjan leikkurit sopivat harrastajille sekä sivutöinä vähän leikkaaville yrittäjille. Emme suosittele Stika-sarjan tuotteita ammattikäyttöön.
Koneiden mukana tulee helppo ja yksinkertainen CutStudio - leikkausohjelma.
Levy sisältää Plug-in sekä Corel Draw tai Adobe Illustrator ohjelmiin.
| Cutting Method: | Friction feed |
| Max. Cutting Range: | Width: 250 mm Lenght: 1000 mm |
| Useable Material Size*1: | Width: 280 to 305 mm Lenght: 1100 mm or less |
| Max. Cutting Speed: | 12 to 40 m/sec |
| Useable Material Type*2: | Vinyl chloride material (material section thickness alone is 0.1 mm or less, thickness including backing paper is 0.3 mm or less) Label paper (thickness including backing paper is 0.3 mm or less) |
| Interface: | USB 1.1 |
| Power Supply/Power Consumption: | Dedicated AC adapter Input: AC 100 V 10%, 50/60 Hz 1.7A Output: DC 19 V, 2.1 A / Approx. 20 W (including AC adapter) |
| Dimensions/Weight: | 440 x 205 x 115 mm/2.7 kg |
| Acoustic Noise Level: | 60 dB (A) or less (according to ISO7779) |
| Operating Environment: | Temperature: 5 to 40°C Humidity: 35 to 80% (no condensation) |
| Included Items: | AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, test-use material, test-use application tape, CD-ROM, user's manual |
*1 Depending upon the type, material that is 500 mm (19-5/8 in.) or longer may shift during cutting.
*2 You may also be unable to cut some types of material.
Hinnat ALV 0 %
