Graphtec FC8600-130 tarraleikkuri KÄYTETTY (2019)


Graphtec FC8600-130 tarraleikkuri KÄYTETTY (2019)
Graphtec FC8600-130 tarraleikkuri KÄYTETTY (2019)
Graphtec FC8600-130 tarraleikkuri KÄYTETTY (2019)
Saatavilla 1 kpl
2 590,00 €
ALV 0,00 %

Model: FC8600-130 
CPU 32-bit CPU
Configuration: Grit rolling type
Drive method: Digital servo drive
Max. cutting area (W x L): 1372 mm x 50 m
Cutting area of guaranteed accuracy: (*2) 1342 mm x 10 m, 894 mm x 15 m
Mountable media width: Min. 50 mm, Max. 1529 mm
Max. cross cut width: 1496 mm 
Number of push rollers: 3 rollers 
Max. cutting speed: 1485 mm/s at 45° direction
Axial acceleration: Max. 39.2 m/s2 (4 G) in 8 steps
Cutting force: Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution 0.005 mm
Programmable resolution: GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy: (*2) Max. 0.1 mm or 0.1 % of plotted length
Repeatability: (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools: 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types: Supersteel (0.9 mm or 1.5 mm diameter)
Pen types: Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type: Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types: (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing: Regular paper from 0.06 to 0.13 mm thick
Light pointer: Built into the tool carriage
Cross-cutter: Built into the tool carriage
Perforation cutting Supported (performed by force control)
Registration mark sensing system: Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface: USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory: 2 MB
Command sets: GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings: Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Display: Graphic type LCD (3-inch, backlight)
Power source: 100 V to 240 V AC, 50 / 60 Hz
Power consumption: Max. 160 VA
Operating environment: 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment: 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions: (W x D x H)  Approx. 1878 x 715 x 1219 mm 
Weight: Approx. 50 kg including stand
Included software: (*4) Windows driver, Plotter controller, Graphtec Pro Studio (*5) (*6),
Cutting Master 4 (*6), Graphtec Studio for Mac
Compatible OS: (*4) Windows 10 / 8.1 / 8 / 7
Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 10.14 (Mojave)
Compatible Standards: UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A

When the 2nd pen holder is installed, the maximum cutting width is changed. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)

Operated with Graphtec specified media and conditions. In long-length cutting, the basket is used.

When some grades of high-intensity reflective film is used, the using CB15UA/CB15UA-K30 blade and reinforcing the backing sheet of the media are recommended.

For more information about compatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec.

The software can be used by downloading from Graphtec website.

It requires an Internet connection in order for activation or registration when starting the software for the first time.


Hinnat ALV 0 %