• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-8805NS akryyliliima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-8805NS akryyliliima
Valm. tuotekoodi
Toimituskulut alk.
612,79 €
ALV 0,00 %

490 ml

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 8805NS is our standard low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it cures twice as fast as most other competitive acrylic adhesives with a comparable open time.

- Durable finished bond with excellent sheer and high impact strength
- Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives
- Bonds difficult surfaces such as powder coats and oily surfaces
- Fast adhesion and drying time reduces waiting and maximizes work efficiency
- Features glass shimming beads to control bond line thickness to prevent excessive squeeze out

Making work safer, faster, and more efficient, that's just a few of the benefits of our 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 8805NS. With a 10:1 mix ratio and a 3- to 5-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi of overlap sheer strength in just under 10 minutes, half the time of typical similar adhesives, increasing throughput and productivity while featuring high peel and impact performance. With a lower odor and non-flammable properties this also creates a safer work environment compared to typical acrylic adhesives. Added non-sag properties assure the adhesive is applied exactly where you want it and won't migrate during the application or bonding processes.

Recommended Applications:
- Metalworking applications
- Bonding plastic and composites
- Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, frame assembly
- HVAC applications such as attaching floor panel and drain pans to frames, side wall attachment or bonding stiffeners to panels
- Bonding oily surfaces

Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower than epoxy adhesives in some situations. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Adhesion Strength - 400 oz/in
Adhesive Type - Acrylic
Brand - Scotch-Weld
Color - Green
Consumer Label - No
Full Cure - 24 Hours @ 73 F (23 C)
Industries - Automotive,‎ Construction,‎ Signage,‎ Consumer Goods,‎ Transportation,‎ Communications,‎ Metalworking,‎ Specialty Vehicle,‎ General Industrial,‎ Appliance,‎ MRO,‎ Electronics,‎ Aerospace
Mix Ratio Volume Base:Accelerator‎ - 10 : 1
Open Time‎ - 3-5 minutes @ 72 F (22 C)
Physical Form - Flowable Liquid
Product Form‎ - Gallon,‎ Cartridge
Product Type‎ - Acrylic Adhesive
Set Time - 6 to 8 Minute
Shear Strength at 72 Degrees F (22 Degrees C - 3500 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture) - 18
Storage Temperature - 72 Degree Fahrenheit
Substrate 1 - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Substrate 2 - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Substrates‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
Viscosity Range (cps) at Room Temperature - 90,000
Volume (metric)‎ ‎ 45 ml,‎ 490 ml