• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-105 epoksiliima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-105 epoksiliima
Tuotekoodi
7100076770
Valm. tuotekoodi
L105K
Toimituskulut alk.
262,92 €
ALV 0,00 %
kpl

Kirkas
50 ml
12/pakkaus

3M™ Scotch-Weld™ Epoxy Adhesive 105 is a very flexible, two-part epoxy adhesive that that gives you the strength you need, cures clear, and remains nearly colorless even when cured in larger masses, where other clear epoxies will turn often turn amber from the reaction exotherm. The final product provides the clear, clean look you desire.

- Very flexible adhesive formula provides strong, permanent bond under movement
- Provides high peel strength and vibration resistance
- Highly flexible adhesive allows different thermal expansion and contraction of bonded substrates, such as when bonding glass to plastic
- Provides relatively high elongation when cured, making it ideal for bonding dissimilar surfaces
- Effective adhesive system for bonding, joining, gluing, attaching, assembling, encapsulating, potting, and sealing applications

The versatile formula provides good structural strength on a wide variety of substrates that include metals, ceramics, wood, and many plastics to offer a useful, effective bonding solution. This clear drying, general purpose epoxy starts with low viscosity for easy, controlled dispensing that helps achieve clean bond lines. 3M™ Scotch-Weld™ Epoxy Adhesive 105 provides relatively high elongation when cured, making very effective for bonding dissimilar surfaces such as glass to metal where differing coefficients of thermal expansion is a consideration.

The mix ratio is 1:1 for quick, precise dispensing and with a four minute working time there's opportunity for repositioning to keep projects on track. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 48 hours (at 72°F/22°C). This adhesive can be dispensed in a variety of methods to accommodate the requirements of the user and the job form.

Adhesion Strength‎ - 990 oz/in,‎ 800 oz/in
Adhesive Type‎‎ - Epoxy
Applications‎‎ - Hard Disk Drive Component Assembly,‎ Bonding,‎ Potting
Brand‎‎ - Scotch-Weld
Color‎‎ - Transparent,‎ Clear
Consumer Label‎‎ - No
Full Cure‎‎ - 48 Hours @ 72 F (22 C)
Hardness‎‎ - 25-30 Shore D
Industries‎‎ - Transportation,‎ Specialty Vehicle,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
Mix Ratio Volume Base:Accelerator‎ ‎‎ - 1 : 1
Open Time‎‎ - 5 minutes @ 72 F (22 C)
Physical Form‎‎ - Liquid
Product Form‎‎ - Gallon,‎ Each
Product Type‎‎ - Epoxy Adhesive
Set Time‎‎ - 20 Minute
Shear Strength at 72 Degrees F (22 Degrees C)‎‎ - 2000 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)‎‎ - 24,‎ 15
Specific Gravity‎‎ - 1.15,‎ 1.11,‎ 1.13
Storage Temperature‎‎ - 72 Degree Fahrenheit
Substrate 1‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Substrate 2‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Substrates‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Viscosity Range (cps) at Room Temperature‎‎ - 1000-5000,‎ 8,000-16,000,‎ 6,500

tech
tech

AAA-luokitus

3M

Roland

Epson

Epilog

Epilog