• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-620NS 2-komponentti rak. liima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-620NS 2-komponentti rak. liima
Valm. tuotekoodi
Toimituskulut alk.
6 166,80 €
ALV 0,00 %

400 ml

3M™ Scotch-Weld™ Urethane Adhesive 620 is a flexible, two-part polyurethane based structural adhesive that performs well in numerous applications where some flexibility is needed. It effectively bonds to many substrates such as composites, metals, wood, and many plastics and rubbers, ceramics and glass (may require primer for durability).

- Versatile polyurethane adhesive has excellent impact resistance and easily adheres to a variety of substrates
- Low dispense viscosity; yet non-sagging after dispensing so adhesive stays where placed
- Low temperature flexibility and low shrinkage
- Long open time provides ample opportunity to position and adjust work

3M™ Scotch-Weld™ Urethane Adhesive 620 is a rapid-setting, two-part, polyurethane adhesive with low temperature flexibility and low shrinkage. These features make this urethane adhesive an ideal choice for bonding dissimilar substrates together, and in exterior applications, particularly in the general industrial, transportation, maintenance and repair, and construction industries. With an easy mixing, non-sag formula you can be assured our adhesive will remain where you place it even when used on vertical surfaces. It is available in bulk or smaller Duo-Pak forms.

Two Parts, One Common Bond
The mix ratio is 1:1 for quick, precise dispensing, and with a 20-minute working time there's ample opportunity for repositioning to keep projects on track. The adhesive reaches handling strength in approximately four hours and is fully cured in 48 hours (at 72°F/22°C). Unlike one-part polyurethanes, this material has no depth of cure problems and cures throughout relatively quickly.

Why Choose Urethane?
Urethane adhesives are two-part adhesives that are relatively flexible when cured, have excellent impact resistance and good adhesion to most plastics. They also bond well to woods, concrete and rubbers, but have reduced resistance to solvents and high temperatures. Uncured adhesive components are sensitive to moisture.

Structurally Strong
Polyurethane adhesives are part of the class of adhesives called "structural adhesives (PDF, 2.6 Mb)," which also includes acrylic, cyanoacrylate, and others. Polyurethanes begin as reactive liquid polymers that undergo a chemical reaction when mixed, and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as need. This "work life" lasts anywhere from a few minutes to a few hours. This class of structural adhesives provides high shear and peel strengths, depending on the formula and better heat and chemical resistance than other common adhesives.

Adhesive Type‎ - Urethane
Brand‎ - Scotch-Weld
Color‎‎ - Black
Consumer Label‎‎ - No
Full Cure‎‎ - 48 Hours @ 72 F (22 C)
Industries‎‎ - Construction,‎ General Industrial,‎ MRO
Open Time‎ - 20 minutes @ 72 F (22 C)
Physical Form‎‎ - Paste
Product Form‎‎ - Each
Product Type‎‎ - Urethane Adhesive
Set Time‎‎ - 4 Hour
Shelf Life in Months (from date of manufacture)‎‎ - 12
Specific Gravity‎‎ - 1.13
Substrate 1‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Substrate 2‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Substrates‎‎ - Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Rubber (Except EPDM),‎ EPDM Rubber
Viscosity Range (cps) at Room Temperature‎‎ - Paste