• If you would like to have the best heatpress…then you have found the right place!
  • UV-tulostimella tulostat suoraan kappaleiden pintaan.
  • Kun haluat parhaan. Monipuoliseen merkintään ja leikkaukseen - Epilog Laser. Made in USA
  • UV-hybridtulostimella tulostat suoraan tasolle tai rullalle
  • Rolandin uusin 4-väritulostin mallisto ammattilaisille
  • Supersuosittu tarraleikkurimme lyömättömään hintaan. Tutustu!
  • Rolandin uuden sukupolven leikkaavat suurkuvatulostimet
  • Epsonin helppous ja laatu nyt DTG-tulotimessa.
  • Tekstiilitulostamisen uusi aikakausi
  • Työpöydälle sopiva A4 koon kaiverruskone erinomaisella ohjelmalla. Vain 4700 €. Made in Japan

3M Scotch-Weld DP-810 akryyliliima

Etusivu > TEOLLISUUSTEIPIT & LIIMAT > Tukkuerät 3M > Scotch-Weld EPX -rakenneliimat ja nokat

3M Scotch-Weld DP-810 akryyliliima
Valm. tuotekoodi
Toimituskulut alk.
274,00 €
ALV 0,00 %

Valkoinen, Ruskea, Musta, Sinivihreä

This unique acrylic gives you the strong shear and peel strength along with ample impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810. It bonds on a variety of substrates ranging from metals, ceramics, wood, and many plastics including nylon. The acrylic adhesive dries to a tan color and begins with high viscosity for controlled dispensing and minimal spread or drip. The mix ratio is 1:1 and provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 10 minutes and is fully cured in 8-24 hours (at 720F /220C). (Note, excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810 is approved under UL 746C, Polymeric Materials Use in Electrical Equipment. Both mixing nozzle and applicator are required for dispensing from the Duo-Pak cartridge and are sold separately. For best results, always use 3M™ Scotch-Weld™ EPX™ Plus II Applicator and Mixing Nozzles.

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower than epoxy adhesives in some situations. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Adhesion Strength‎ ‎ 480 oz/in Adhesive Type‎ ‎ Acrylic Brand‎ ‎ Scotch-Weld Color‎ ‎ White,‎ Tan,‎ Black,‎ Green/Blue Consumer Label‎ ‎ No Full Cure‎ ‎ 8-24 Hours @ 72 F (22 C) Industries‎ ‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Military & Government,‎ General Industrial,‎ MRO,‎ Electronics,‎ Consumer Goods Mix Ratio Volume Base:Accelerator‎ ‎ 1 : 1 Open Time‎ ‎ 10 minutes @ 72 F (22 C) Physical Form‎ ‎ Flowable Liquid Product Form‎ ‎ Liter,‎ Gallon,‎ Each Product Type‎ ‎ Acrylic Adhesive Set Time‎ ‎ 10 Minute Shear Strength at 72 Degrees F (22 Degrees C)‎ ‎ 3600 Pound-Force Per Square Inch Shelf Life in Months (from date of manufacture)‎ ‎ 12 Specific Gravity‎ ‎ 1.07 Storage Temperature‎ ‎ <=40 Degree Fahrenheit Substrate 1‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard Substrate 2‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard Substrates‎ ‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard Viscosity Range (cps) at Room Temperature‎ ‎ 20,000,‎ 18,000-22,000,‎ 17,000-21,000